Trade Agreement: NAFTA / CFTA / FTAs with Peru / Colombia / Panama / Korea Tendering Procedures: Generally only one firm has been invited to bid Non-Competitive Procurement Strategy: Exclusive Rights Comprehensive Land Claim Agreement: No Vendor Name and Address:
C-Therm Technologies Ltd. 921 COLLEGE HILL RD 921 COLLEGE HILL RD 921 COLLEGE HILL RD FREDERICTON New Brunswick Canada E3B6Z9 Nature of Requirements:
1. Advance Contract Award Notice (ACAN)
An ACAN is a public notice indicating to the supplier community that a department or agency intends to award a contract for goods, services or construction to a pre-identified supplier, thereby allowing other suppliers to signal their interest in bidding, by submitting a statement of capabilities. If no supplier submits a statement of capabilities that meets the requirements set out in the ACAN, on or before the closing date stated in the ACAN, the contracting officer may then proceed with the award to the pre-identified supplier.
2. Definition of the requirement
The National Research Council Canada has a requirement for the supply of 1 TCi Thermal Conductivity Analyzer. The system must include:
i. TH910000
C-Therm Tci
a. Thermal Property Analyzer b. High Resistance (HR) Electronic Control Unit c. Standard Laptop Windows® 10 Operating Software d. TECAS Software License e. Operator Manual f. Pelican Protective Case
ii. TH-TCi-MTPS-SB MTPS Sensor & Board a.
A Modified Transient Plane Source (MTPS) high-precision sensor, electronics sensor board, and baseplate stand and sample weight.
b. Must conform to ASTM D7984.
iii. TH-MKM Max k Module a. Thermal Conductivity Range: 0.01 to 500 W/mK b. Plug and Play capability to easily test aerogels, traditional insulation/foams, polymers, composites, ceramics, metals, liquids, powders, textiles and fabrics. c. Includes small volume liquids testing cell and certified reference materials: d. Expanded Polystyrene (EPS), LAF6720, Pyrex, Pyroceram, Phosphor Bronze and Copper (or suitable replacements). Customizable Calibrations with the C-Therm Cal Wizard
iv. TH-Tci-HT-UPG High Temp MTPS Sensor a. MTPS sensor for high temperature operation b. Temperature range up to 500°C for insulation and powders.
v. CM-SRV Installation & Commissioning a. 1-Day of Onsite Installation and Commissioning.
3. Criteria for assessment of the Statement of Capabilities (Minimum Essential Requirements)
3.1 Background:
The National Research Councils Powder Forming Division (NRC PFD) works with many different industrial materials and requires precise scientific equipment to precisely measure a wide range of materials, with different thicknesses, different shapes, at many different temperatures without preparation. NRC PFD must measure samples including, but not limited to, several applications in the automotive sector, aerospace, and packaging.
3.2 Definition of Requirement:
The National Research Canada (NRC) requires a Thermal Conductivity Analyzer to directly measure the thermal conductivity, and thermal effectivity of liquids, powders and solids up to 500 degrees Celsius, with a test time under 1 second, and with limited sample volume requirements. C-Therms TCi Thermal Conductivity Analyzers patented MTPS technique is the only method that offers a one-sided testing method with a test time under 1 second with limited sample volume requirements (1.25 ml). No other analyzer can be applied to the range of materials that the NRC is required to test.
3.3 Minimum Essential Requirements:
Any interested supplier must demonstrate by way of a statement of capabilities that its system meets the following requirements:
1. Must have a thermal conductivity range of 0.01 W/mK to 500 W/mK; 2. Must be plug and play to easily test aerogels, traditional insulation/foams, polymers, composites, ceramics, metals, liquids, powders, textiles and fabrics; 3. Must have a small volume liquids testing cell; 4. Must have customizable calibrations with a Cal Wizard; 5. Must have Modified Transient Plane Source sensor for high temperature operation range up to 500 Celsius for insulation and powders; 6. Must have a Thermal Property Analyzer; 7. Must have a high Resistance Electronic Control Unit; 8. Must have standard laptop Windows 10 Operating software; 9. Must have Modified Transient Plane Source high precision sensor and an electronics sensor board, and baseplate stand and sample weight; and 10. Must come onsite to install and commission the equipment.
Applicability of the trade agreement(s) to the procurement
This procurement is subject to the following trade agreements:
Canadian Free Trade Agreement (CFTA); and North American Free Trade Agreement (NAFTA).
5. Justification for the Pre-Identified Supplier
The National Research Canada requires a Thermal Conductivity Analyzer to directly measure the thermal conductivity and thermal effectivity of a range of liquids, powders and solids up to 500 degrees Celsius, with a test time under 1 second, and with limited sample volume requirements. C-Therms TCi Thermal Conductivity Analyzers patented MTPS technique is the only method that offers a one-sided testing method with a test time under 1 second with limited sample volume requirements (1.25ml). No other analyzer can be applied to the range of materials that the NRC is required to test.
6. Government Contracts Regulations Exception(s)
The following exception to the Government Contracts Regulations is (are) invoked for this procurement under subsection 6(d) - "only one person is capable of performing the work").
7. Exclusions and/or Limited Tendering Reasons
The following exclusions and/or limited tendering reasons are invoked under the:
A. Canadian Free Trade Agreement (CFTA) Articles 513: Limited Tendering 1.b.ii and iii.
ii. the protection of patents, copyrights, or other exclusive rights iii.due to an absence of competition for technical reasons.
B. North American Free Trade Agreement (NAFTA) Article 1016 Limited Tendering Procedures 2.b.
where, for works of art, or for reasons connected with the protection of patents, copyrights or other exclusive rights, or proprietary information or where there is an absence of competition for technical reasons, the goods or services can be supplied only by a particular supplier and no reasonable alternative or substitute exists; (CAP Code 71)
8. Ownership of Intellectual Property
Ownership of any Foreground Intellectual Property arising out of the proposed contract will vest in the Contractor.
9. Period of the proposed contract or delivery date
The system must be delivered on or before August 30, 2019.
10. Cost estimate of the proposed contract
The estimated value of the contract, including option(s), is $78,387.54 (GST/HST extra).
11. Name and address of the pre-identified supplier
C-Therm Technologies Ltd. 494 Queen Street, 1st Floor Fredericton NB E3B 1B6
12. Suppliers' right to submit a statement of capabilities
Suppliers who consider themselves fully qualified and available to provide the goods, services or construction services described in the ACAN may submit a statement of capabilities in writing to the contact person identified in this notice on or before the closing date of this notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
13. Closing date for a submission of a statement of capabilities
The closing date and time for accepting statements of capabilities is June 6, 2019.
14. Inquiries and submission of statements of capabilities
Inquiries and statements of capabilities are to be directed to:
Name: Julie Adler Brooks Title: Supply Specialist Address: 10th Floor 4900 Yonge Street, Toronto ON M2N 6A6 Telephone: 647-267-0313 E-mail: julie.adlerbrooks@pwgsc.gc.ca
Delivery Date: Above-mentioned
You are hereby notified that the government intends to negotiate with one firm only as identified above. Should you have any questions concerning this requirement, contact the contracting officer identified above.
An Advance Contract Award Notice (ACAN) allows departments and agencies to post a notice, for no less than fifteen (15) calendar days, indicating to the supplier community that it intends to award a good, service or construction contract to a pre-identified contractor. If no other supplier submits, on or before the closing date, a Statement of Capabilities that meets the requirements set out in the ACAN, the contracting authority may then proceed with the award.
However, should a Statement of Capabilities be found to meet the requirements set out in the ACAN, then the contracting authority will proceed to a full tendering process.
Suppliers who consider themselves fully qualified and available to provide the services/goods described herein, may submit a statement of capabilities in writing to the contact person identified in this Notice on or before the closing date of this Notice. The statement of capabilities must clearly demonstrate how the supplier meets the advertised requirements.
The PWGSC file number, the contracting officer's name and the closing date of the ACAN must appear on the outside of the envelope in block letters or, in the case of a facsimile transmission, on the covering page.
The Crown retains the right to negotiate with suppliers on any procurement.
Documents may be submitted in either official language of Canada.