040545 - POWERHOUSE CRANE MODERNIZATION PROJECT SLAVE FALLS GENERATING STATION

Scope of Work:                
The Work shall consist in all that is required for the Powerhouse Crane Modernization at Slave Falls Generating Station consisting of but not limited to, the following ITEMS:
 
ITEM 1 - Design Solution for Modernization of the Powerhouse Crane
 
Item 1 includes all labour and material required to design for supply, manufacturing, installation, and commissioning of ITEMS 2 to 5 in accordance with the Technical Requirements.
 
ITEM 2 – Manufacture, Supply, and Delivery of Equipment and Materials for Modernization of the Powerhouse Crane
 
Item 2 includes the provision and delivery of all required material and equipment for the modernization of the powerhouse crane in accordance with the Technical Requirements.
 
ITEM 3 – Installation of Modernized Powerhouse Crane Equipment
 
Item 3 includes all labour and material required to remove or modify existing equipment and install new equipment in accordance with the Technical Requirements.
 
ITEM 4 – Commissioning of Modernized Powerhouse Crane
 
Item 4 includes all material and labour required to commission the modernized powerhouse crane and provide associated commissioning reports in accordance with the Technical Requirements.
 
ITEM 5 – Training of Purchaser’s Personnel
 
Item 5 includes all material and labour required to conduct an on-site training course and provide training material for operators in accordance with the Technical Requirements. Cost to be provided on a per person basis.
 
ITEM 6 – Mobilization
 
Item 6 includes all costs associated with mobilization of crew and accommodations to complete ITEMS 3 to 5.
 
ITEM 7 – Demobilization
 
Item 7 includes all demobilization costs following completion of the Work.
 
ITEM 8 – Supply and Delivery of Spare Parts (Purchaser’s Option)
 
Item 8 includes the supply and delivery of recommended spare parts for the Work as per the Technical Requirements. Cost to be provided per item.
 
ITEM 9 – Modification of Existing Fall Arrest Systems (Purchaser’s Option)
 
Item 9 includes all material and labour required to design, supply, and install modifications of the existing powerhouse crane fall arrest systems as per the Technical Requirements.
 
ITEM 10 – Addition of Access Ladder for Trolly Upper Platform or Alternate (Purchaser’s Option)
 
Item 10 includes the design, supply, and install of an access ladder for the trolly upper platform or alternate solution as per the Technical Requirements.
 
ITEM 11 – Provision of Marking Systems for the Bridge (Purchaser’s Option)
 
Item 11 includes the provision of marking systems on the main runway and bridge end trucks as per the Technical Requirements.
 
ITEM 12 – Provision of Marking Systems for the Trolley (Purchaser’s Option)
 
Item 12 includes the provision of marking systems on the bridge girder and trolley as per the Technical Requirements.
 
ITEM 13 – Provision of an Override Switch on the New Radio Transmitter (Purchaser’s Option)
 
Item 13 includes the provision of an override switch on the new radio transmitter as per the Technical Requirements
 
ITEM 14 – Extra Repairs and Upgrades during the Work (Purchaser’s Option)
 
Item 14 includes all labour and material required to perform extra repairs and upgrades that may be required during the Work as per the Technical Requirements. Pricing to be provided on an hourly basis.
 
ITEM 15 – Extra Upgrades Typical of Crane Modernizations (Purchaser’s Option)
 
Item 15a – Replacement of main hoist thrust bearing (Purchaser’s Option)
 
Item 15a includes all labour and material required to replace the main hoist thrust bearing as per the Technical Requirements.
 
Item 15b – Replacement of bridge drive wheel keeper plates at operator cab (Purchaser’s Option)
 
Item 15b includes all labour and material required to replace the bridge drive wheel keeper plates at the operator cab as per the Technical Requirements.
 
Item 15c – Replacement of splice plates on main runway rails (Purchaser’s Option)
 
Item 15c includes all labour and material required to replace the bridge drive wheel keeper plates at the operator cab as per the Technical Requirements.
 
Item 15d – Addition of visual travel indicator when crane is travelling (Purchaser’s Option)
 
Item 15d includes all labour and material required for the addition of a visual travel indicator as per the Technical Requirements.
 
Item 15e – Addition of directional signs on the underside of the bridge girder (Purchaser’s Option)
 
Item 15e includes all labour and material required for the addition of directional signs on the bridge girder as per the Technical Requirements.
 
Item 15f – Addition of disconnecting means within sight of the main contact conductors (Purchaser’s Option)
 
Item 15f includes all labour and material required for the addition of disconnecting means within sign of main contact conductors as per the Technical Requirements.